H₂News: Mr. Patrick Schaller, Purem by Eberspächer is traditionally known for exhaust aftertreatment and acoustic technology. How did the company get involved in the hydrogen sector?
Patrick Schaller: We fundamentally see ourselves as a technology provider that continuously develops its portfolio and draws on existing expertise when evaluating new business areas. We took the same approach for the hydrogen market—specifically fuel cells—and realized that we already possessed transferable expertise from our work in exhaust and acoustic technology. This quickly led to the development of our first products, such as the Cathode Isolation Valve, which is based on an acoustic exhaust flap.
H₂News: Let's jump right into the technologies. To start off, could you explain what problem the De-Hydrator solves?
Schaller: Water—especially in the form of moisture in the air—is a natural part of the fuel cell process. Depending on operating conditions and environmental factors, a clearly visible cloud of steam may form at the vehicle’s exhaust outlet because the water condenses there. Our dehydrator specifically reduces this water vapor within the system.
Here’s how it works: We actively cool the saturated, humid air from the fuel cell process using ambient air. This reduces the temperature, causes heat exchange to occur, and causes the water to condense right within the system. We separate the water droplets from the air using an integrated water separator in the dehydrator system. We then combine the air—which has been slightly warmed by the heat exchange—with the already cooled exhaust air from the fuel cell, thereby reducing the relative humidity in the entire exhaust stream. This multi-stage process significantly reduces the water content at the exhaust outlet, while we specifically discharge the water elsewhere via the water separator.
H₂News: Does this technology also have a positive impact on traffic safety?
Schaller: Yes, absolutely. From our perspective, it not only improves the acceptance of these vehicles on the road, but—especially in the commercial vehicle sector—it also makes a significant contribution to traffic safety by ensuring that other road users are not impaired by the cloud of steam.
We have experienced this firsthand during winter vehicle tests: When the air is dry and cold and we are driving behind a fuel-cell-powered truck on a country road, visibility can be severely impaired by fogging. We also hear from customers and truck manufacturers that this is a significant problem; they are setting specific requirements to reduce fogging.
H₂News: Is the de-hydrator primarily intended for use in trucks?
Schaller: Yes, it is intended primarily for the commercial vehicle sector. Since steam generation in these vehicles is particularly high due to the larger volumes of air and water, we see that as the primary area of application. Furthermore, given the current conditions in the commercial vehicle sector, we expect the greatest market potential for mobile fuel cell applications to lie there.
H₂News: Would it be conceivable, in the long term, to scale down this technology for use in passenger cars?
Schaller: In principle, it’s possible, but efficiency decreases as the size of the unit decreases; there’s always a trade-off between available installation space and performance. However, we can design the system to be highly modular and have already adapted it to fit various truck installation spaces.
H₂News: You are testing the De-Hydrator in collaboration with RWTH Aachen University; how did this partnership come about?

The fuel cell truck from RWTH Aachen University. © Eberspächer Group GmbH & Co. KG
Schaller: This was originally an independent research project at RWTH Aachen University, where researchers had converted a battery-electric truck to run on fuel cells. After a few test drives, they noticed significant steam buildup.
This led to a collaboration aimed at specifically conditioning the exhaust air and reducing visible steam formation. For us, this meant that we were able to demonstrate the physical effectiveness of our system under real-world conditions. To do so, we conducted both road tests and bench tests.
H₂News: What exactly was examined in these tests?
Schaller: On the one hand, the focus was on water separation efficiency. The key issue here was how to direct the water away not from the tailpipe but to another, non-critical location, so that surrounding components—which might otherwise freeze in the winter—would not be affected. On the other hand, the focus was on the vapor formation itself; in this case, we were able to assess the amount of vapor primarily by visual inspection.
Another very important factor was pressure loss: The fuel cell is highly sensitive to excessive back pressure from the exhaust gas, which is why there is always a trade-off between efficiency and pressure loss. We measured the pressure loss, and the values matched our CFD simulations*.
Our simulations and test bench results were also confirmed during the initial field tests conducted at a German automaker.
* Computational Fluid Dynamics, German: Numerical Fluid Mechanics
H₂News: Let’s move on to another one of your technologies, the HRB. It’s based on air compressors from Eberspächer Vairex. What modifications were needed to enable their use in the hydrogen sector?
Schaller: To enable the use of hydrogen, we had to focus primarily on optimizing leak-tightness requirements and material compatibility. At Purem by Eberspächer, we have a materials laboratory that is already working with hydrogen and has provided us with excellent support on issues such as component selection.
With regard to leak tightness, we have developed our own sealing concept that isolates the hydrogen-carrying side from the surrounding environment. When it comes to material compatibility, we have tested existing components—for example, for hydrogen embrittlement —and paid particular attention to their hydrogen compatibility when selecting sealing elements. Of course, this applies not only to the HRB but to our entire hydrogen portfolio: Every component must be tested in advance with regard to its materials.
H₂News: How exactly does the HRB work?
Schaller: In a fuel cell, not all of the hydrogen supplied can be converted in a single pass. That is why an excess of hydrogen is intentionally used to ensure that all cells in the stack are supplied evenly; as a result, there is always some unused hydrogen left over.
Our HRB uses precisely this hydrogen and recirculates it back into the process, thereby making more efficient use of the fuel. Depending on the load point and operating strategy, an average of about 80 percent of the supplied hydrogen is utilized; without recirculation, the remaining 20 percent would have to be vented from the fuel cell and treated at considerable cost. The HRB ensures that this portion is efficiently recirculated, thereby reducing the hydrogen consumption of the entire system.
H₂News: You mention up to 25,000 operating hours. How do you ensure that the HRB operates reliably for that long?
Schaller: We bring many years of experience from our exhaust systems, which must ensure similar service lives in the commercial vehicle sector. In the development process, we combine this with early-life testing under hydrogen conditions. Key factors here include the selection of suitable materials, the bearing design, thermal management, sealing, and the design of the electrical components.
We also conduct simulated endurance tests totaling over 8,000 hours—which, mathematically speaking, approximate 25,000 operating hours—as well as separate component tests, such as environmental and other stress tests. We now also have our own hydrogen test bench at our Esslingen facility, which can very effectively simulate the anode path of the fuel cell.
H₂News: Have there already been initial field tests for the HRB, similar to those for the De-Hydrator?
Schaller: Yes, though not directly at customer sites, but rather both internally and at external test benches and laboratories with the appropriate hydrogen environment. Here, too, we first designed the HRB using CFD simulations, and the subsequent performance tests confirmed these simulations. This applies both to the Essential HRB, which is based on the side-channel compressor principle, and to our newer product, the HRB High Performance.
H₂News: What exactly is the HRB High Performance?
This radial compressor design is a new development of ours and is specifically engineered for the higher system outputs of the next generation of high-performance fuel cells. With this, we are laying the groundwork for future fuel cell systems in the heavy-duty truck and off-highway sectors. We plan to produce it in collaboration with Eberspächer Vairex.
H₂News: If customers want to use the De-Hydrator or one of the HRB models, do they need to make any custom adjustments, or are the products ready to use right out of the box?

The De-Hydrator. © Eberspächer Group GmbH & Co. KG
Schaller: We generally aim to design our products to be modular so that they are suitable for a variety of applications, whether in passenger cars or heavy-duty trucks. Depending on the customer’s interfaces, installation space, or control strategy, we then have to adjust the size and throughput, but we always try to retain the underlying technology.
With the De-Hydrator, adaptation to the customer’s specific installation space is more pronounced. With the HRB, on the other hand, our goal is to avoid making any customer-specific mechanical adjustments whenever possible. In general, we aim to offer products here that are available as off-the-shelf solutions.
H₂News: Let’s make a prediction: Are there certain things that, in your view, would need to happen for fuel cells and hydrogen engines to be widely adopted?
Schaller: In my view, the technical feasibility has been proven. The biggest challenge, therefore, lies in bringing the product to market, not in the technology itself. Above all, mass production requires planning certainty. That can only happen if the infrastructure—for example, in terms of funding conditions and OEM* projects—is in place.
For me personally, standardization is also a key issue—for example, when it comes to testing or requirements. We’re currently receiving a wide variety of requirements from customers. This diversity makes it difficult to establish a common basis for validation. The faster specific applications and production volumes develop, the faster we can bring technologies like the HRB or the De-Hydrator into series production and thus scale them up.
And when it comes to politics, I would like to see a certain openness toward technology.
* Original Equipment Manufacturer
H₂News: To wrap up, let’s take a look at the Hydrogen Technology World Expo in Hamburg this October: Will you be showcasing both technologies there in person?
Schaller: Yes, that's the plan. We want to showcase both the De-Hydrator and both versions of the HRB, as well as our entire product portfolio in the hydrogen sector.
We were there last year and saw that it is an ideal platform for connecting with potential customers, partners, and industry experts and discussing the next steps toward hydrogen mobility.
H₂News: We hope you enjoy the trade show and thank you for the interview, Patrick Schaller!
Learn more about Purem by Eberspächer









